Nokia Beacon G6 Quick Start Guide
Quick Start Guide
1 – Plug in: Plug in the power adapter and then connect it to the back of your Beacon G6.
2 – Power on: Push the on/off button, the LED on the front of the device will turn on. Plug the Ethernet cable into the blue WAN port on your Beacon G6.
3 – Connect to Modem or Ethernet Outlet:
If the Modem is provided: Connect the other end of the Ethernet cable into either the WAN, ETHERNET, or GIGA MC port on the modem (The modem provided and the name of the port depend on the technology in your building).
If the Modem is not provided: Connect the other end of the Ethernet cable to an available outlet in your home. Only one outlet will be active so you may need to try multiple outlets before you will get an active connection.
4 – Wait for the green light: The light on your Beacon G6 will turn green when it is ready.
5 – Connect to Wi-Fi: Connect your devices using the SSID and Wi-Fi Key shown on the bottom of the Beacon G6
Router Management Set-Up
To manage your router yourself and to configure things like your password and network settings, please follow these steps:
1 – Open a web browser while connected to the Nokia WiFi network and go the default gateway IP address: 192.168.1.1
2 – The login page appears. Enter the username and password in the login window. The username and password are on the sticker on the bottom of your Beacon G6.
For instructions on advanced settings and features, please visit: Nokia Beacon G6 Product Guide
If you are having any problems, please do not hesitate to contact Tech Support at 604.642.6688 or send us a direct message on Facebook or Twitter.