Calix U10 Product Guide
Calix U10 Physical Connections
Calix U10 Hardware Specifications
Calix U10 LED Indicators
Calix U10 Mesh Set-Up
Quick Start Guide
1 – Plug in: Plug in the power adapter and then connect it to the back of your Calix U10
2 – Power on: The LED on the front of the device will turn on. Plug the Ethernet cable into the WAN port on your Calix U10
3 – Connect to Modem or Ethernet Outlet:
If the Modem is provided: Connect the other end of the Ethernet cable into either the WAN, ETHERNET, or GIGA MC port on the modem (The modem provided and the name of the port depend on the technology in your building).
If the Modem is not provided: Connect the other end of the Ethernet cable to an available outlet in your home. Only one outlet will be active so you may need to try multiple outlets before you will get an active connection.
4 – Wait for the green light: The light on your Calix U10 will turn green when it is ready.
5 – Connect to Wi-Fi: Connect your devices using the SSID and Wi-Fi Key shown on the back of your Calix U10.
Router Management Set-Up
To manage your router yourself and to configure objects such as your password and network settings, please follow these steps:
1 – Open a web browser while connected to the router’s network and enter the default gateway IP address: 192.168.1.1 on the web address bar.
2 – The login page appears. Enter the username and password in the login window. The username and password are on the back of the Calix U10 router behind the Wall Mount Cover.
Configuring the SSID and Password
After log in to the Web-based GUI, under Wi-Fi, click Primary Network -> Change SSID -> Change Password and hit Apply
Configuring a Secondar Network
1 – Click Wi-Fi -> Secondary Networks on the left pane. The Wi-Fi network page displays the existing Wi-Fi networks.
2 – Turning on Isolation will allow clients connected to this network to NOT be able to communicate with the Primary Network, and vice versa.
Configuring Port Forwarding
1 – Click Advanced -> Security -> Port forwarding on the left pane. The Port forwarding page displays.
2 – Fill out the blank fields according to the Port forwarding parameters, then click Apply on the bottom of the page.
If you are having any problems, please do not hesitate to contact Tech Support at 604.642.6688 or send us a direct message on Facebook or Twitter.
