How to Set Up Your Mesh (Wired)
If you don’t want to use your mesh unit over wireless, it’s easy to connect with a wire.
Before you begin, you will need to set up your main system and grab an Ethernet cable.
1. First, plug your mesh into a power outlet. Once the light is flashing red, you can plug your Ethernet cable into the mesh.
2. Plug the other end of the Ethernet cable into the LAN port on the back of your system.
3. Once pairing is complete, the main system and the mesh will both show a solid blue light. This may take a few minutes.
That is all you need to do to set up your mesh with your router in a wired manner. If you have any questions, please do not hesitate to contact Tech Support at 604.642.6688 or message us on Facebook/Twitter!