Connecting Wired Devices to Your System
If you don’t want to use your mesh unit over wireless, it’s easy to connect with a wire.
Before you begin, you will need to set up your main system and grab an Ethernet cable.
Connect A Device
The first thing you need to do is plug the device you want to connect into the power outlet.
Next, you will plug the other end of the Ethernet cable into the LAN port on the back of your system.
Multiple Wired Devices
If you have more than one wired device you need to connect, you can always get a gigabit switch with multiple ports.
Then you can connect as many devices as you need with Ethernet into the switch for direct connections.
Should you run into any issues, please do not hesitate to contact Tech Support at 604.642.6688 or message us directly on Facebook/Twitter.